Uureg Limbs
The ultra-high performance
The Uureg, features a 100% carbon content that places a high priority on stability, speed and low weight.
This limb is dedicated to archers seeking higher accuracy.
The S-Curve profile makes the draw easy, smooth and a joy to shoot.
Unrivalled Feel & Performance
Speed 
Smoothness 
Stability 
Faster limbs improve accuracy especially in windy conditions, the lower trajectory means less time in the air, less wind drift, better sight marks and easier unmarked estimations at the longer distances.
Smoothness brings a pleasant comfort to your draw. This helps when shooting many arrows by helping you maintain proper technique, as if you were using a lower poundage bow.
Smoothness is a characteristic of the limbs’ profile and their draw force curve (DFC) at your draw length. Less slope means more smoothness.
The S-Curve’s smoothness is equivalent to that of the Xcurve, as the increase in poundage during the last inch of your draw is only about 3.5%.
The Curve’s smoothness is similar to that of smooth laminate limbs, with a 5% increase in poundage during the last inch of the draw.
Limbs which show a 6% or more increase in poundage for the last inch of draw are usually not considered to be smooth limbs.
Every archer seeks a stability which allows consistent arrow grouping. Stability comes from the limbs’ torsional stiffness. This acts at two levels: first, if your limbs resist torsion, it will be very difficult to apply torque to the riser, and your bow will remain in line; second, when the arrow accelerates, nock travel will be straigther resulting in better grouping.
Our unique S-Curve profile
The S-Curve profile (S for Smoothness, Speed and Stability) combines the best attributes of our previous Curve and Xcurve limbs.
Natural draw-force curve
The profile of the S-curve branch gives this smooth, natural, continuous traction. A shallower slope translates into greater flexibility.
Streamlined limb bottom
A screwless design has enabled us to reduce the maximum thickness and mass weight.
NOTE: Uukha Formula adapters cannot be used with S-Curve limbs.
Monolith Carbon: a unique technology
Our limbs are made from many unidirectional tapes of prepreg carbon, moulded and fused together in CNC moulds. This makes our limbs light, strong and resistent to delamination.
The benefits of our technology
Resistance Smoothness Speed Reduced vibrationWe have upgraded our Monolith Carbon with new lay-ups, to reduce mass and stresses. Monolith Carbon is a unique technology offering consistent performance, day after day, in all types of weather. It has proven to be more reliable and longer lasting than laminated construction.
Finishing
StdMat
Standard decal,
matt varnish