Calculate poundage at your draw length

Calculate poundage at your draw length

(change draw length, poundage and validate with enter)

Riser size : 27" 25" 23" 21" 19" 17" 15"
Limbs size : 66" 68" 70"
Bow length :
Your AMO draw length tolerance*
marked poundage +- 1#
limbs XcurveCurveHx10 Nature Evo²*
poundage at your draw length (tiller bolts at medium settings) +- 1#
poundage at your draw length (tiller bolts at +5% settings) +- 1#
poundage at your draw length (tiller bolts at Upro/UproLite max settings (+9%)) +- 1#

XCurve limbs: Vx1000 Xcurve (and Vx1000 2014).

Curve limbs: Vx1000 Curve, Ux100 Curve, Hx10 Evo2, Ex1 Evo2, X0 Evo2.

For previous generations, use Curve column .

Hx10 Nature Evo² are weighed with à 19'' handle.

To measure your AMO draw length, do a mark on your arrow in front of the berger button when the arrow just leaves the clicker. Measure the distance between the mark and the nock in inches and add 1.75

Tolerance on Nature limbs is 2.5#

NB: Results are valid only for Uukha risers (25"). Results for other sizes are based on extrapolations. If you use a riser from an other brand, consider these results as a simple estimation.

Coyright reserved uukha 2014/2015